- T-LC series/40GHZ
- 【Brief】：
Adopting a special structural design and advanced production technology, the cable has excellent electrical and mechanical performance indicators in the full frequency range, and has a high cost performance. It is the preferred low-cost solution for the XFWP series. In terms of electrical performance, the signal transmission rate is 77%, the temperature phase stability is less than 1300PPM, and it also has the characteristics of low loss, low standing waves, and high shielding efficiency. In terms of mechanical properties, the overall low-density insulation and copper tape wrapping make the cable have better bendability and better mechanical phase stability. In terms of environmental resistance, the cable uses raw materials with excellent environmental resistance to make it have a service temperature Wide range, anti-corrosion, anti-mold, moisture-proof, flame-retardant and other characteristics
2. Insulation: adopts overall low-density PTFE, with a dielectric constant of about 1.65
3. Shielding layer: Double shielding layer structure is adopted, the inner shielding layer is wrapped with silver-plated copper tape, and the outer shielding layer is braided with silver-plated copper wire. The silver-plated copper tape wrapping reduces the loss of the cable and increases the shielding efficiency. The high-density braid increases the tensile strength of the cable.
4. Sheath: FEP or PFA with excellent environmental adaptability is used, which is a cable with high environmental adaptability
|
Center Conductor Diameter (mm) |
0.32 |
|
Center Conductor Type |
Solid |
|
Insulation Diameter (mm) |
0.90 |
|
Shields Diamete r (mm) |
1.40 |
|
Jacket Diameter (mm) |
≤1.80 |
|
Min.bending radius (mm) |
9 |
|
Impedance （Ω） |
50 |
|||
|
Capacitance （PF/m） |
88 |
|||
|
Operating frequency （GHz） |
40 |
|||
|
Velocity of propagation （%） |
76 |
|||
|
Max. Operating voltage （kV） |
0.4 |
|||
|
Shielding effectiveness （dB@1GHz） |
≥90 |
|||
|
Phase Stability vs Flexure） |
4GHz |
|||
|
18GHz |
0.3° |
|||
|
Operating temperature range （℃） |
-65~+165 |
|||
|
-55℃~+85℃Phase Change vs Temperature（ppm） |
≤1300 |
|||
|
Insertion Loss |
Frequency （GHz） |
Insertion Loss （dB/m） |
||
|
0.5 |
0.72 |
|||
|
1 |
1.04 |
|||
|
3 |
1.84 |
|||
|
4 |
2.14 |
|||
|
6 |
2.66 |
|||
|
8 |
3.11 |
|||
|
10 |
3.51 |
|||
|
12 |
3.89 |
|||
|
15 |
4.40 |
|||
|
18 |
4.87 |
|||
|
26.5 |
6.08 |
|||
|
40 |
7.73 |
|||
QR Code